Use the Windows Performance Analyzer plugin for WindowsPerf
Introduction
Visualize data from WindowsPerf using WPA
Next Steps
Use the Windows Performance Analyzer plugin for WindowsPerf
Review frequently asked questions
These FAQs were drafted with an approved AI-assisted workflow and reviewed by Arm contributors before publication. Human technical review remains part of the process so the final page reflects engineering rigor, accuracy, and Arm editorial standards.
Run WindowsPerf with the
wperf stat command on a Windows on Arm system and save the output as a .json file using the --output option.Open the WindowsPerf
.json file in WPA. If the plugin is installed correctly, WPA loads the data and exposes the plugin’s timeline and telemetry visualizations.You should see timeline and telemetry data corresponding to the WindowsPerf run. The plugin presents these views inside WPA for inspection.
Verify the file was created by
wperf stat on a Windows on Arm machine and saved as .json with the --output option. Also confirm the WPA plugin is installed using its install guide.Collect data with
wperf stat using the -t option, then open the generated .json file in WPA. In the Graph Explorer section, expand Counting timeline to view the recorded events by core or event.