Create IoT applications with Windows on Arm and AWS IoT Core
Introduction
AWS IoT Core
Connect the emulator to AWS IoT Core and stream data
Testing the data stream
Next Steps
Create IoT applications with Windows on Arm and AWS IoT Core
Review frequently asked questions
These FAQs were drafted with an approved AI-assisted workflow and reviewed by Arm contributors before publication. Human technical review remains part of the process so the final page reflects engineering rigor, accuracy, and Arm editorial standards.
Sign in to the AWS Console, search for IoT, and select IoT Core. In the IoT Core console, choose Connect one device to open the setup wizard.
Use the
ping command shown in the Register and secure your device step of the wizard. Successful replies confirm your device can reach the endpoint.Use the MQTT test client and subscribe to
Emulators/Weather/SensorReadings. You should see the emulator’s messages appear under that topic.Confirm the emulator is running and connected. Verify the topic filter matches exactly and recheck endpoint reachability with the
ping command.The MQTT test client will display the emulator’s data after you subscribe to the topic. Seeing messages arrive confirms the stream is active.