Design an AXI-Lite peripheral to control GPIOs
Introduction
Setup a Workspace in Xilinx Vivado
Create a custom AXI4 Peripheral
Connect AXI4 Peripheral to ZYNQ Processing System
Generate the bitstream and write your application using Vitis IDE
Review
Next Steps

  Log an issue

  Fork and edit

  Discuss on Discord

What you've learned

You should now know how to:

  • Configure and integrate an AXI-Lite peripheral with a Cortex-A9 Processing System.
  • Program the Cortex-A9 processor to read the state of switches and control the LEDs using a C program.
  • Demonstrate a basic functional system that lights up the LEDs based on the status of the switches.

Knowledge Check

Which of the following lines of Verilog would create an input wire named 'switch'?

In this Learning Path, you wired the switch and the LED to which of the following blocks?

In order to program the device with the design, you must complete several steps in a certain order, choose the correct option.


Back
Next