Get Started with Keil Studio Cloud
Introduction
Work with an example project
Next Steps

  Log an issue

  Fork and edit

  Discuss on Discord

Get Started with Keil Studio Cloud

Before you begin

To access Keil Studio Cloud, you need an Arm Account . If you already have an Mbed account, you can use it to access Keil Studio.

To work with development boards over USB, you must use Keil Studio in a desktop browser that supports the WebUSB standard: Google Chrome or Microsoft Edge (Chromium). All other features are supported in the latest versions of the following desktop browsers: Google Chrome, Microsoft Edge, Opera, Safari, and Mozilla Firefox.

Get started with the IDE

  1. Go to keil.arm.com .

  2. Click the Hardware menu to see the list of supported hardware.

    You can search for a board by name or vendor, or filter the list by vendor or core. You can also display boards with example projects with the Only include boards with example projects checkbox.

  3. Search for and select the V2M-MPS3-SSE-300-FVP board in the list.

    You can either download or import example projects into Keil Studio from the Projects tab and get access to board details from the Features and Documentation tabs.

  4. Find the hello example in the Projects tab and click the Open in Keil Studio button.

    Image Alt Text:Find and import hello Find and import hello project

Import and build an example project

  1. Log into Keil Studio with your Arm or Mbed account if you are not already logged in. Keil Studio opens. Confirm the project name in the Clone dialog box. Keil Studio sets the newly imported project as the active project by default.

Image Alt Text:Import dialog Specify a name for the imported project

  1. Click Add project. The project loads to your workspace and is the active project. The README.md file of the project displays. Review the file to learn more about project settings and board requirements.

    Image Alt Text:Project imported First screen after project import

  2. In the top-left corner, select the Connected device. Set to Virtual Device - SSE-300-MPS3:

Image Alt Text:Target selection Select your target

  1. Use the build button to create a binary image:

Image Alt Text:Build project Build the project for your target

  1. The Output window shows the success of the operation:

Image Alt Text:Output log Output window logs operational success

Run the example project

  1. Use the play button to run the project on Arm Virtual Hardware in your browser:

Image Alt Text:Build project Run the project on your target

  1. The Task: Run Program window shows the success of the operation:

Image Alt Text:Output log Output window logs operational success

To stop program execution, click the Cancel button.

Manage Software Components

If you want to review or change the software components that are used in the project, open the Manage Software Components view by clicking the button:

Image Alt Text:Build project Build the project for your target

The view opens and shows the currently selected software components:

Image Alt Text:Manage Software Components Manage Software Components View

Using the Show selected only toggle, you can switch between this short view and the full list of components. In the full list, enable or disable components as required.

Back
Next