# Next Steps

## In this learning path

- [Introduction](https://learn.arm.com/learning-paths/embedded-and-microcontrollers/bare-metal/)
- [Create and build a Hello World example project](https://learn.arm.com/learning-paths/embedded-and-microcontrollers/bare-metal/hello/)
- [Write a reset handler](https://learn.arm.com/learning-paths/embedded-and-microcontrollers/bare-metal/reset/)
- [Modify the example to use the UART for printf output](https://learn.arm.com/learning-paths/embedded-and-microcontrollers/bare-metal/retarget/)
- [Create event-driven application (1)](https://learn.arm.com/learning-paths/embedded-and-microcontrollers/bare-metal/event-driven1/)
- [Create event-driven application (2)](https://learn.arm.com/learning-paths/embedded-and-microcontrollers/bare-metal/event-driven2/)
- [Switching Exception Levels](https://learn.arm.com/learning-paths/embedded-and-microcontrollers/bare-metal/exception-levels/)
- [Next Steps](https://learn.arm.com/learning-paths/embedded-and-microcontrollers/bare-metal/_next-steps/)

## Explore related resources
Find more information about the topics in this Learning Path:
- [Arm Cortex-A Series Programmer's Guide for ARMv8-A](https://developer.arm.com/documentation/den0024)
- [Arm Compiler for Embedded User Guide](https://developer.arm.com/documentation/100748)

## Review frequently asked questions
These FAQs were drafted with an approved AI-assisted workflow and reviewed by Arm contributors before publication. Human technical review remains part of the process so the final page reflects engineering rigor, accuracy, and Arm editorial standards.

### Which Arm tools should I install to follow the steps?
You can use Arm Development Studio with a configured license, or install Arm Compiler for Embedded and Arm Fixed Virtual Platforms (FVP) individually. The examples run on an FVP model.

### Which Fixed Virtual Platform should I use, and how many CPUs does it provide?
Use the FVP_Base_AEMvA Architecture Envelope Model. It’s a generic Arm Architecture platform that implements four processors.

### How do I confirm that printf isn't using semihosting before switching to the UART?
Import `symbol __use_no_semihosting` in `hello.c`. If your build or run depends on semihosting, this exposes the dependency and prompts you to retarget `printf` to the PL011 UART on the FVP.

### What should I expect after adding the reset handler?
The minimal reset handler puts all but one processor to sleep and runs the application on a single processor. This ensures the rest of the example executes on one core.

### How do I know my interrupt setup is working?
Exceptions are routed to EL3 and GICv3 is initialized with the timer as an interrupt source. When the timer triggers, your handler is invoked, demonstrating the event‑driven flow.
