# Next Steps

## In this learning path

- [Introduction](https://learn.arm.com/learning-paths/automotive/openadkit1_container/)
- [About Software-Defined Vehicles and SOAFEE](https://learn.arm.com/learning-paths/automotive/openadkit1_container/1_sdv_soafee/)
- [Learn about ROS 2 and Open AD Kit](https://learn.arm.com/learning-paths/automotive/openadkit1_container/2_automotive_softwares/)
- [Set up Open AD Kit](https://learn.arm.com/learning-paths/automotive/openadkit1_container/3_setup_openadkit/)
- [Run the Open AD Kit demo](https://learn.arm.com/learning-paths/automotive/openadkit1_container/4_run_openadkit/)
- [Next Steps](https://learn.arm.com/learning-paths/automotive/openadkit1_container/_next-steps/)

## Deploy Open AD Kit driving simulation in a container on Arm

## Explore related resources
Find more information about the topics in this Learning Path:
- [Autoware OpenAD Kit demo project](https://github.com/autowarefoundation/openadkit_demo.autoware/)
- [SOAFEE (Scalable Open Architecture For Embedded Edge)](https://soafee.io/)
- [Autoware Foundation](https://www.autoware.org/)
- [ROS 2 Documentation](https://docs.ros.org/en/humble/)

## Review frequently asked questions

These FAQs were drafted with an approved AI-assisted workflow and reviewed by Arm contributors before publication. Human technical review remains part of the process so the final page reflects engineering rigor, accuracy, and Arm editorial standards.

### What result should I expect after launching the Docker Compose stack?
The visualizer service starts in detached mode, followed by continuously running planning and simulation services. Active containers for these components indicate the demo is operating as intended.

### Where are the ROS 2 commands and service configurations defined?
They are defined in the docker/docker-compose.yml file. Reviewing that file shows the launch order, container settings, and ROS 2 commands used by the demo.

### Can I run the same workflow on cloud and on-prem Arm Neoverse systems?
Yes. The workflow has been tested on Amazon EC2 and an Ampere Altra workstation, so you can choose either a cloud instance or an on-premise Arm Neoverse system.

### What should I check before starting the demo to avoid resource-related failures?
Verify the Arm Neoverse system provides at least 16 CPUs and 32 GB of RAM. Ensure Docker and Docker Compose are installed and available.

### If I stop and restart the demo, do I need to reconfigure anything?
No. Docker Compose allows you to start with the previous session’s settings without modifications, so the configuration persists between runs.
